LEICA CL QUICK START GUIDE The comprehensive instructions are available at: https://en.leica-camera.com/Service-Support/Support/Downloads If you wish to receive a printed copy of the comprehensive instructions, please register at: www.order-instructions.leica-camera.
6 3 14 7 1 13 12 5 10 9 11 8 1 2 4 20 19 16 17 18 21 25 15 22 23 24 26a 26 27 28 29 30
1 Strap lugs 10/13 Setting wheels – in the menu: 10 scrolls within the menu lists – in review mode: 10 enlarges/reduces the recording and 13 browses – in recording mode: see table 2 Lens release button 3 Self-timer LED / AF assist lamp 4 Leica L-Bayonet 11/14 Setting wheel buttons – in recording mode: 11 calls up the right setting wheel’s secondary function or the FN menu and 14 calls up the exposure mode – in review mode: 11 enlarges/reduces a recording and 14 marks a recording B B A A 5 Conta
22 Direction pad For scrolling within the menu and for settings 23 Center button – in the menu: For confirming settings and calling up submenus – in recording mode: For calling up the different info screens 24 Status LED Lights up during input/output to/from the memory card, while using WLAN functions, and during a firmware update 27 Tripod thread A 1⁄4 DIN 4503 (1⁄4“) 28 Battery locking slider 29 Battery compartment 25 Monitor 30 memory card slot UHS-II, UHS-I, SD-/SDHC-/SDXC 2 3“ TFT LCD, 1.
SELECTING A RECORDING MODE 1 Press left setting wheel button 14 2 Turn left setting wheel 13 to select recording 1 mode 2 ASSIGNING THE SETTING WHEEL / SETTING WHEEL BUTTON FUNCTIONS P Exposure compensation Program shift ISO Changing button assignment S Shutter speed Exposure compensation ISO Changing button assignments A Exposure compensation Aperture ISO Changing button assignment M Shutter speed Aperture ISO Changing button assignment Exposure compensation Exposure compensation
TOUCH CONTROL OPERATIONS Touch control Tap briefly Switching: recording/review modes Tap twice Switching: Photo/Video Long touch, drag and drop Swipe horizontally/ vertically two-finger pinch two-finger spread Touch AF F2.8 1/8000 ISO 12500 EV allows moving the AF frame by drag and drop, Touch AF + Release adds releasing the shutter.
FACTORY SETTING Main Menu FV FN RW FV FN RW FV FN RW FV FN RW FV FN RW FV FN RW FV FN RW FV FN RW FV FN RW FV FN RW FV FN RW FV FN RW FV FN RW FV FN RW FV FN RW FV FN RW Can be assigned to the FAVORITES menu list Can be assigned to the FN FN Button menu list Can be assigned to the RW right setting wheel button menu list FV FAVORITES Menu FV FV FN RW FV FN RW FV FN Button menu list FV FN FV FV FV FV Right setting wheel button menu list RW
SAFETY NOTES • Always store small parts (e.g. the accessory shoe cover) as follows: –– out of reach of children –– in a location where they will not get lost and will not be stolen • Modern electronic components react sensitively to electrostatic discharge. As people can easily pick up charges of tens of thousands of volts by walking on synthetic carpets for example, a discharge can occur when you touch your camera, particularly if it is placed on a conductive surface.
Important: Use only the accessories specified and described in these instructions or by Leica Camera AG with the camera. If the camera is exposed to significant temperature fluctuations, condensation can form on the monitor. Wipe it off carefully with a soft dry cloth. • If the camera is very cold when turned on, the monitor image will initially be slightly darker than normal. As soon as the monitor warms up, it will reach its normal level of brightness. • Cosmic radiation (e.g.
Disposal of electrical and electronic equipment (Applies within the EU, and other European countries with segregated waste collection systems) This device contains electrical and/or electronic components and must therefore not be disposed of in general household waste! Instead, it should be disposed of at a recycling collection point provided by the local authority. This costs you nothing.
FCC Caution: To assure continued compliance, follow the attached installation instructions and use only shielded interface cables with ferrite core when connecting to computer or peripheral devices. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. Trade Name: LEICA Type No. 7323 Responsible party/Support contact: Leica Camera Inc. 1 Pearl Count, Unit A, Allendale, New Jersey 07401 Tel.
TECHNICAL DATA Camera name Leica CL Camera type Digital APS-C system camera Type no. 7323 Order no. 19 301 (black) Lens mount Leica L bayonet with contact strip for communication between lens and camera Compatible lenses Lenses with Leica L bayonet, Leica M/R lenses using the Leica M-Adaptor-L/Leica R-Adapter L Sensor APS-C-sized CMOS sensor (23.6 x 15.7 mm) with 24.96/24.
