User Manual

ManualsBrandsLeica ManualsBatteries & Power AccessoriesSBP PRO 1 Lithium-Ion Battery for Leica S Typ 007

The displays

THE DISPLAYS

IN THE VIEWFINDER

1 2 3 5 6 97 8 1210 11

6 12

1 Horizon

(Tilting about the longitudinal axis/inclination about the transverse axis;

values apply as examples for inclination in clockwise direction; other

directions are shown analogously)

–

max. ±0.5°

–

0.5-2.5°

–

2.5-5°

–

5-10°

–

ﬂashing ≥10°

2 Shutter speed/exposure time

– Manually set value for

and , automatically controlled value for

and ; display in half steps, or

–

(high) or (low) for overexposure or underexposure in the

automatic exposure modes

, , and by ﬂash light, or for

values below the metering range.

–

B setting for long exposures

–

Warning message for full memory card(s)

3 Exposure operating mode

–

Automatic program

–

Aperture priority

–

Shutter speed priority

–

Manual setting of shutter speed and aperture

4 Aperture

Manually set value for

and , automatically controlled value for

and

; display in half steps

5 Flash display

Lit Ready

Flashing Flash charging, not ready

6 Light scale

(Marks: each

⁄2

EV step, last marks/ﬁgures ﬂash at ≤ -3EV/≥ +3EV )

to indicate

– Manual exposure compensation,

– Deviation of the current metering from the stored exposure setting

(with metered value storage in the automatic exposure modes

, )

– Exposure compensation

7 Flash display

Lit = Shutter speed set ≥ sync speed

8 Focus displays

–

Appears only in manual mode or in the case of manual override

of the AF: Lights up continuously if the distance is set too far

–

In manual mode: Lights up continuously with correct setting

– With

AFs: Lights up continuously with correct setting, ﬂashes

if correct setting is not possible,

– With

AFc: Lights up continuously with correct setting, goes

out if focusing is restarted

–

Appears only in manual mode or in the case of manual override

of the AF: Lights up continuously if the distance is set too short

9 Exposure compensation / ﬂash exposure compensation set

10 Exposure metering method

–

Multi-ﬁeld metering

–

Center weighted metering

–

Spot metering

11 Picture counter

–

Total remaining number of pictures

–

External storage

–

(ﬂashing with 2 Hz) = Memory card full

–

(ﬂashing with 2 Hz) = No memory card inserted

–

Maximum number for picture series

–

Error message

12 ISO sensitivity

–

For manual setting

–

For automatic setting

–

HI 1

(ISO3200) /

HI 2

(ISO6400) /

HI 3

(ISO12500)=

Currently set sensitivity

Note:

The viewﬁnder LCD is always lit when the camera is switched on. The

brightness of this lighting is automatically adapted to the ambient bright-

ness for optimum legibility.

Inhalt_EN.indd 60 12.10.2015 09:34:28