Specification

Page 2 von 2
I
As at April 2015
I
Specifications are subject to change without notice
Leica Camera AG
I
Am Leitz-Park 5
I
35578 WETZLAR
I
GERMANY
I
Telephone [phone]
I
Fax [phone]
I
www.leica-camera.co
Eyepiece Calibrated to - 0.5 dpt. Corrective lenses from -3 to +3 diopter available.
Image field indication By activating two bright-line frames each: for 35 and 135 mm, or for 28 and 90 mm, or for 50 and 75 mm.
Automatic switching when lens is attached. Frame color (red/white) selectable in menu.
Parallax compensation The horizontal and vertical differences between the viewfinder and the lens are automatically compensated for in
according to the relevant distance setting, i.e. the viewfinder bright-line frame automatically aligns with the subject
detail recorded by the lens.
Matching viewfinder
and actual image
At a focusing distance of 2 meter, the bright-line frame size corresponds exactly to the sensor size of approx.
23.9 × 35.8 mm. At infinity setting, depending on the focal length, approx. 7.3 % (28 mm) to 18 % (135 mm) more is
recorded by the sensor than indicated by the corresponding bright line frame and slightly less for shorter distance
settings than 2 meter.
Magnification 0.68 x (for all lenses).
Long base
rangefinder
Split or superimposed image range finder shown as a bright field in the center of the viewfinder image.
Effective
metering base
47.1 mm (mechanical measurement base 69.25 mm × viewfinder magnification 0.68 x).
Displays
In the viewfinder Four-digit digital display with dots above and below, displays.
On back 3" TFT LCD monitor with 16 million colors and 921,600 pixels, approx. 100 % image field, max. 170° viewing angle,
glass cover of extremely hard, scratch-resistant sapphire crystal for LiveView and review mode.
Shutter/
shutter release button
Shutter Metal blade focal plane shutter with vertical movement.
Shutter speeds
For aperture priority: (A) continuous from 60 s to 1/4000 s. For manual adjustment: 8 s to 1/4000 s in half steps.
B: for time exposures up to max. 60 s (in conjunction with self-timer T function, i.e. 1st release = shutter opens,
2nd release = shutter closes). (1/180 s): fastest shutter speed for flash synchronization, HSS linear flash mode
possible with all shutter speeds faster than 1/180 s with HSS-compatible Leica system flash units); for video recordings
(aperture priority and manual mode): 1/30 to 1/4000 s, for manual mode possible override of specified shutter speed
to ensure correct exposure.
Activation of shutter By integrated motor, low noise operation.
Picture series Approx. 3 pictures/s, ≤ 30 pictures in series.
Shutter release button For single pictures: two-stage, 1. Activation of exposure metering and exposure lock (in aperture priority mode),
2. Shutter release; standard thread for cable release integrated.
Self-timer Delay optionally 2 s (aperture priority and manual exposure setting) or 12 s, set in menu, indicated by flashing LED on
front of camera and corresponding display in monitor.
Turning the camera
on/off
Using main switch on top of camera; optional automatic shutdown of camera electronics after approx. 2/5/10
minutes; reactivated by tapping the shutter release
Power supply 1 lithium ion battery, rated voltage 7.4 V, capacity 1800 mAh, capacity indicated in top panel display, when shutter
held open (for sensor cleaning) additional acoustic warning of low capacity, maximum charging current/voltage:
DC, 1100 mA/8,25 V. Model no.: BP-SCL2, Manufacturer: VARTA Microbattery, made in Indonesia
Charger Inputs: 100–240 V AC, 50/60 Hz, automatic switching, or 12 V DC, 1.3 A; Output: DC, 7.4 V, 1000 mA.
Model no.: BC-SCL2, Manufacturer: Guangdong PISEN Electronics Co., Ltd., made in China.
GPS Optional (only with multifunction hand grip attached, not available everywhere due to country-specific legislation,
i.e. enforced automatic shutdown in those countries), data written to EXIF header in picture files.
Level indication Measurement using 3-level acceleration sensor, measuring range: inclination (about transverse axis) and tilt
(about longitudinal axis) each ± 90°, measuring accuracy/display sensitivity: ≤1° at 0-40°C / 32-104°F and
horizontal alignment, display in monitor.
Camera body
Material All-metal die cast magnesium body, synthetic leather covering. Brass top panel and base, black chrome plated finish.
Frame selector Allows the bright-line frame pairs to be manually activated at any time (e.g. to compare detail).
Tripod thread A 1/4 (1/4") DIN, stainless steel in bottom.
Operating conditions 0 to +40°C/32 to 104°F.
Interfaces ISO hot shoe, accessory socket, contact strip for Multifunction Hand Grip M.
Dimensions (L × H × D) Approx. 138,6× 42 × 80 mm (5.45 × 1.65 × 3.15 in).
Weight (with battery) Approx. 680 g (24 oz).
Scope of delivery Charger 100-240 V with 2 mains cables (Euro, USA, varies in some export markets) and 1 car charging cable,
lithium ion battery, carrying strap, body bayonet cover, cover for accessory shoe/accessory socket,
Adobe
®
Photoshop
®
Lightroom
®
license.
Subject to changes in design, production and availability.