User manual

This assembly sheet does not replace the complete manual
on provided CD (i.e. LED illumination installation).
Insert arm into table clamp and tighten
screw.
Take out table clamp from box.
Box contains flex arm and table clamp.
Open the two screws on the focus arm
of the Leica A60...
...and bring pin into horizontal position.
Tighten screws again.
Leica A60 F – Assembly Sheet
Pick one of three positions of the clamp
according to table thickness.
Your instrument is now ready for usage!Attach Leica A60 to flex arm and
tighten knob to secure the instrument.
Choose position on table edge and
tighten well the two screws.