Leica DISTO S910 Manual

Leica DISTO
TM
S910 808167
24
ENFunctions
Pointdata transmission
1
90°
90°
±5°
-1.697m
2
Levelling is man-
datory!
For levelling,
Smart Base has
to be folded out
and device
needs to be in
an inclination
range of +/-5°.
Check
status
line:
indicates proper levelling
indicates insufficient levelling
Rotate the device
two times clockwise
90°. Follow the in-
structions on the dis-
play. Levelling is
finished when OK
icon appears on the
display.
Do not move device after levelling!
indicates that smart base
was moved after levelling
P
3
4
Aim laser at first
point.
13.207 m
5
WLAN data transfer
of 3 coordinates x, y, z
with pointfinder photo
without pointfinder photo
6
Aim at additional
points.
Leave actual function, go to
default operation mode.
7
2x
i
This function sends the x, y z coordinates of the
measured point. If WLAN is switched off, the device
requests to switch on WLAN.
Data transfer works only with WLAN.