Manual

96
Instructions for Use V 2.2 RevI – 08/2013
5. Operation
Deleting reagents from the list
• HighlightthereagenttobedeletedintheSET UP REAGENTS AND WARNING THRESHOLDS
screen.
• PressDELETE.
• PressYES in the screen to conrm the reagent is deleted.
Fig. 134

Conguring the reagent list (continued)
The ASP 6025 has a Reagent Management System(RMS)thatensuresoptimizedreagentconsump-
tion and the best possible tissue inltration results.
The Reagent Management System is controlled via warning threshold values that display the
reagent replacement.
For each reagent, a value of this type can be dened depending on the use.
The RMS has two areas:
The warning threshold values, which are entered for all reagents in the reagent list and displayed
in the reagent status.
The reagent status also shows the values determined for the alcohols used (ethanol, isopropanol
and their mixtures with water).
The warning threshold values can be dened in the reagent list as:
• Numberofprocessedcassettes
• Numberofcycles(1programsequence=1cycle)or
• Daysuntilchangingthereagent
The RMS is enabled by entering warning threshold values for one of these parameters specied
above in the reagent status.
5.2.2 The RMS system - adjusting warning threshold values
Please remember that a reagent which is already used in a program
cannot be deleted.