Manual

88
Instructions for Use V 2.2 RevI – 08/2013
5.1.9 Saving or loading data
Saving data to a USB stick


With this function, all data relating to the instrument can be
transferred to a USB stick.
The following data is saved:
• allprograms,
• thereagentlist,
• theinstrumentstatus,
• theinstrumentconguration,
• alllogles,
• theinstrumentinstallationparameters.
To save the instrument data to a USB stick, proceed as follows:
• PresstheENTRIES and SAVE TO USB buttons to open the
window of the same name.
• InsertaUSBstickinoneoftheUSBportsontheinstrument
and press the COPY FILES button.
Fig. 116
• Adisplayonthescreenshowswhichdataiscurrentlybeing
copied while the les are being transferred (Fig. 118).
• Whenalldatahasbeensuccessfullytransferred,acompletion
message appears.
Fig. 117
Fig. 118


5. Operation
If instrument data has already been stored on
the USB stick, it will be overwritten and thus
deleted. This will be indicated in a warning
message (Fig. 117) and must be conrmed
TWICE with YES. Pressing the NO button
terminates the process.