Manual

54
Instructions for Use V 2.2 RevI – 08/2013
4.5 Switching the instrument on
4. Initial Operation
Screen saver
A screen saver will turn o the screen display if no key has been
pressed for 30 minutes.
• Pressanypartofthetouchscreentorestorethescreen.
After having been restored, the on-screen functions will be
nonoperational for a few seconds to avoid accidental activa-
tion of any keys.
• Plugthepowercable(39, Fig. 26) into the "POWER IN" socket on the rear side of the instrument.
• Then,connectthecabletothepowersocket.Ifapplicable,switchontheswitchforthepowersocket.
• Toswitchontheinstrument,pressintheON/OFF switch an on the rear panel of the instrument (item 37 in Fig. 26).
Fig. 59
Fig. 58
• Theinstrumentwilltakeafewminutestoinitializeafter
switching on.
See opposite for corresponding touchscreen display (Fig. 58).
• TheStartscreenwillthenappear.ThisisthePROGRAMS menu
while no programs have been dened in the FAVORITES menu
(Fig. 59).