Manual

46
Instructions for Use V 2.2 RevI – 08/2013
Fig. 43
60.1
60.2
• Whenpullingoutabath,thefront(ontheleftintheimage)
cover (60.1) can be folded upwards (Fig. 43) to facilitate
lling and cleaning.
56
60.2
• Theother(intheimage,right)cover(60.2) can also be moved
and removed for cleaning (Fig. 43, below).
• Ineachparanbaththereisasieve(56) (as in the paran
station) to protect the paran lines from contamination.
4. Initial Operation
• Allparanbathshavetwohandles(59) for pulling out and
carrying.
Two movable covers (60.1 and 60.2) provide for better
thermal insulation and prevent the liquid paran from
sloshing out when being pulled out (Fig. 43).
59
60.1 60.2
• Ifaparanbathhasbeenpulledout,thisisindicatedby
a red border (Fig. 42) and the signal light next to the bath
turns red.
Each signal light also turns red if the congured temperature
is not reached or the melting time has not yet ended.
Fig. 42
Caution!
Theparaninthebathisliquidandhot—it
can cause burns. The handles and covers are
also hot, therefore always wear gloves and
proceed carefully.