Manual

43
Leica ASP6025
4. Instrument Setup
4.4.4 The monitor
• TheLeicaASP6025isprogrammedandoperatedviaacolor
LCD touchscreen.
• Ascreensaverwillturnothescreendisplayifnokeyhas
been pressed for 30 minutes. Press any part of the touch-
screen to restore the screen.
After having been restored, the on-screen functions will be
nonoperational for a few seconds to avoid accidental activa-
tion of any keys.
• Thetouchscreenisfastenedtoastablebasewithfourscrews.
All terminals are protected from contact with reagents. The
touchscreen itself is resistant to all reagents used in the
instrument. Despite this, avoid contact between the two.
Immediately wipe up any reagent splashes!
USB port
Rear side of the monitor with
fasteners and a USB port
• Ontheleftsideofthe
touchscreen (as viewed
from the front), there is a
USB port (50) for saving or
downloading data onto or
from a USB stick.
50
• IftheUSBportisnotbeingused,itshouldbeclosedwith
the plastic cover (51) to prevent reagents from entering it.
51
52
Fig. 36
It is mandatory to carry out a virus check rst
before you insert a USB stick!
A small plate (Detail, item52) with the serial
number of the instrument is attached to the
console in which the USB port is located.