Manual

41
Leica ASP6025
4.4.2 Counter area
• Totherightoftheretortinfrontofthescreen,thereisastain-
less steel counter area (45) for setting down the prepared
specimens (Fig.33). Baskets removed from the retort can
also be set down there.
• Thecounterareahasanedgetopreventuncontrolledspread-
ing of uid residue. However, we recommend also covering
the counter area with a cellulose underlay.
4. Instrument Setup
Active carbon lter
Fig. 32
• Toinsert/replacetheactivecarbonlter(13), open the ap
(24) behind the retort lid.
24
13.1
13
• Pushthefilterinasfarasit
will go with the handle facing
forwards in the direction of the
arrow, as shown in Fig.32.
• Thedateonwhichthelterhas
been inserted can be marked
on the label (13.1) on the front
side.
Fig. 33
45
Filter label with order No. and space for enter-
ing the insertion date
The active carbon lter is only an additional
measure to minimize harmful vapors in the
area surrounding the instrument. Ventilation
of the workroom is required in any case. The
lter should be replaced every thirty days.