Manual

32
Instructions for Use V 2.2 RevI – 08/2013
4. Initial Operation
Unpacking the instrument (continued)
Installing the monitor
• Themonitor(5) is wrapped in a plastic dust cover (109) and
is placed with the screen facing downwards in a molded foam
cushion (98) next to the retort (Fig.12).
107
107
Fig. 12
109
Fig. 14
98
102
5
108
• First,takeoutthetwofoamparts(107) next to the bracket
(Fig. 12). Then you remove the dust cover.
• Beforethemonitoredisscrewedtothebracket,youshould
check that the three terminals (102) (power supply, USB port
and monitor cable) on the bottom of the monitor are fas-
tened correctly (Fig.14).
• Asmallplasticbagisfastenedtotherearsideofthebracket
(101), which contains four screws with compatible washers
(100)(andasize3Allenkey(104)) (Fig. 13).
100
101
Fig. 13
98
104
5