Manual

30
Instructions for Use V 2.2 RevI – 08/2013
4. Initial Operation
Setting up the ramp
Unpacking the instrument (continued)
Fig. 8
93
92
94
91
91
• Pulloutthetworails(91)
for the ramp beneath the
instrument by pulling
them forwards (Fig. 8).
91
• Hooktheserailsontheleft
and right with the panel
(92) into the groove (93)
of the pallet so that they
are ush with the wooden
board (94) that holds the
instrument (Fig. 9).
95
95
Fig. 10
Fig. 9
• Whiledoingso,makesurethattheplate(92) is between the
two screws (95) in the groove. These screws prevent the rail
from being able to shift laterally.
97 96
• Todoso,thelevermustbefoldedupwards.
• Nowreleasethebrakelever
(97) on the two front transport
castors (96) so that the instru-
ment can be moved (Fig.10).