Manual

29
Leica ASP6025
4. Instrument Setup
Fig. 6
Fig. 7
89
88
90
86
85
87
Removing the transport anchors
Unpacking the instrument (continued)
• First,removetheadditionalRTU-bottle(10) out of the
transport anchor.
• Takeoutthetwotransportanchors(86) made of foam
(Fig. 6).
• Afterwards,theoutersleeveofthepackaging(85) must be
removed from the pallet (87) by pulling it upwards.
Unpacking and removing the accessories
• Thecarton(89) contains the accessories that are not yet
installed in the instrument.
Carefully set the carton aside.
• Thenremovetherestofthemoldedfoammaterial(90) on
the front side of the pallet (Fig. 7).
• Then,carefullyremovetheplasticdustcover(88) from the
instrument.
10
Before unpacking the instrument, be abso-
lutely certain to read the unpacking instruc-
tions. They are attached to the outside of the
transport packaging.