Manual

165
Leica ASP6025
7. Troubleshooting
7.1 Troubleshooting
When a problem occurs in the Leica ASP6025, take the following steps to diagnose the problem:
• Checkforerrormessagesindicatingthenatureoftheproblem.
• Ifanerrormessageisdisplayed,presstheHelpbuttononthemessageforanyinformation
relating to the cause.
• ChecktheRunLogforanymessagesthatindicatethenatureofthefailure.Ifthefailure
occurred during a program run, check the Run Log for an indication of whether the failure
occurred during the ll, processing or drain cycles, and the station in use at the time.
7.1.1 Power failures
If there is evidence of power to the instrument:
• VerifythatthepowerplugispluggedintothesocketandthatthesocketisswitchedON.
• Verifythatthepowerswitchesontherearoftheinstrument(adjacenttothepowerlead),and
on the side of the instrument are both switched ON.
• Errormessagesindicatingthattherehasbeenapowerfailuremeanthatpowerhasbeenlost
to the heaters and the monitor, but not to the main control electronics. Perform test procedure
as described in "Power failure" (Chapter 7.1.2).

Use the functions in the SMART SCREEN menu to test operating steps individu-
ally, such as the ll, drain, pressure, and vacuum steps.
If you cannot identify the problem by carrying out the above listed steps, call
Leica Technical Service.