Manual

126
Instructions for Use V 2.2 RevI – 08/2013
Setting the end time
• PresstheFINISH TIME button to call up the entry window
for the end time (Fig. 184).
There are three options for setting the end time:
• Entertheendtimeatwhichtheprogramistoterminate
using 24-hour notation.
• SelectNOW if the program is to be terminated without a
waiting time.
• SelectTIME REQUEST if the system is not to prompt for input
of a desired end time until the program is started.
• PressOK to conrm the ending time.
Dening Favorite programs (continued)

Fig. 184
Assigning a day for the end time
If an end time has been assigned to a Favorite program, a spe-
cic weekday can also be set on which the program is to end.
• PresstheDAY button, the selection window for the days of
the week will appear.
• SelectthedesireddayfromthelistandconrmwithOK
(Fig. 185).

Fig. 185
5. Operation
If an end time is assigned to a Favorite pro-
gram, the delay step is prolonged so that the
program is terminated at exactly the prese-
lected time.