Manual

120
Instructions for Use V 2.2 RevI – 08/2013
• Iftheparanhasbeentransferredoutoftheparanstation
and into a paran bath using the SMART SCREEN menu,
the paran station is automatically set to "Empty" in the
Reagent Status.
Fig. 173
• Therefore,theparanstationmustbesetto"Full" in the
reagent status (Fig. 173) menu to activate heating and melt-
ing after being relled with paran pellets.
Fillingaparanbath(continued)
• Todoso,gotothereagentstatus,selecttheparanstation
and press the SET AS FULL button.
5. Operation


When the paran station is closed, a message appears explaining that the MELT button can be pressed to set
the paran station to FULL in the reagent status and to recalculate the melting time.
Caution!
Iftheparanbathsaresetto"Empty"intheReagentstatus(Fig. 173), heating is also deactivated at the same
time.Thismeansthatanyparanresiduescansolidifyandtheselectedbathisthusnotusable.