User guide

49
Leica ASP200 S
5.1.6 Adding and/or modifying programs
Creating a new program
• Makesureyouareloggedonatsupervisorlevel.
• IntheVIEW/EDIT PROGRAMS screen (Fig. 45) highlight a program as
similar as possible to the program you wish to create. (This minimizes
the number of operating steps).
• PressCOPY to copy the selected program. The new program will have
the same name as the program copied, however, the figure "(2)" will be
added to indicate the change.
• Highlightthelinecontainingthenewprogram.
• PressPROGRAM NAME at the top of the table to display the keyboard.
• Enterthenewprogramname.
Editing program steps
• PressingEDIT (in Fig. 45) calls up the PROGRAM STEPS screen.
• IntheheadlineyouwillfindthePROGRAM NAME.
• Thecolorsontheleftborderofthetableindicatethereagentgroupsto
which the reagents belong.
• Theprogramstepsaredisplayedintheorderinwhichtheyarecarried
out. For each program, up to 13 steps can be defined.
The following characteristics of each program step can be edited:
• Reagentname.
• Durationofstep
(with the exception of fill and drain steps).
• Retorttemperature
(if "Ambient" is selected, the display for the retort temperature remains
empty).
• Typeofpressureand/orvacuumcycle
• Retortdraintime.
• Delaystep.
5. Operation
Fig. 46