User guide

Instructions for Use V 1.4, RevE – 03/2013

4.10 Switching off the instrument

If the instrument must be completely switched off or disconnected from the

power supply, please proceed as follows:

• PressMENU to switch to the MENU FUNCTIONS window.

• PresstheEXIT APPLICATION button there.

A message appears stating that all data has been stored and the system is

being shut down.

Once all data has been stored, the following message appears:

YoucannowswitchofftheinstrumentwiththeON/STOP switch on the

right of the instrument and with the ON/OFF switch on the rear panel of the

instrument (Fig. 4, 42).

Pressing the RESTART key restarts the instrument.

4. Initial Operation

Fig. 21

Fig. 20

Notice!

The instrument is allowed to be switched off completely in this

way only. Otherwise, severe damage to the instrument's hardware

and loss of data can occur.