Owner's manual

Specifications
Leica Angle Two
™
User Manual Rev A02 © Leica Biosystems Richmond Inc. 2010 49
Tooth Bar Movement Ranges
Probe Holder
Computer
Monitor
DV 20 mm
AP 44.5 mm
Diameter 7.88 mm
Shaft length 200 mm
Probe holder block 11 mm square (10 grooves spaced at 1 mm on 3 sides)
Standard clamp holds 0.2 to 2 mm shaft
Side clamp holds 0.2 to 4.5 mm shaft
“C” clamp holds 0.2 to 4.5 mm shaft
Set screw on shaft holder: 3/32″
Voltage 115 V or 230 V, switch settable
Current 3.6 A or 1.8 A
Frequency 50 Hz or 60 Hz
Regulatory Approvals FCC class B, CE and UL certified
Voltage 100 V–240 V, auto
Current 1 A
Frequency 50 Hz or 60 Hz
Regulatory Approvals CE and UL certified