Owners Manual

Description
The passive lter network of the Black Cube Statement is located between two linear active
amplier stages. Phase errors that occur due to active lter designs are thereby eliminated.
Low-loss, high precision WIMA foil capacitors in the lter network are responsible for very
good localization and soundstage reproduction.
Sensitivity for 775mV/eff. output voltage: 0,77mV/7,7mV switchable on board (MC/MM).
Input capacitance: 100pF default
Input impedances: 47 kOhms/ 1 kOhms/100 Ohms switchble on board (Dip-switches with
gold plated contacts), one slot for solder free installation of custom impedance on the prin-
ted circuit board (PCB). No need for expensive impedance plugs!
Output impedance: <100 Ohms
Gold plated RCA-connectors, massive ground connector
The external AC power supply of the Black Cube Statement can be placed up to two meters
away from the audio section. The AC voltage is rectied, regulated and buffered onboard
the audio pcb.
Case of 1,5mm aluminium protects the audio electronics.
Please read this manual rst before connecting the Black Cube Statement to
mains voltage!