User's Manual

12
Lead sealing pliers
Hairsprings
Screw
B) Preparation before installation
 The meter should be installed in ventilated and dry place to ensure the meter’s safety and
reliability. In the dirty or risky area, the meter should be installed in a protection box.
 Meter should be fixed on a firm, fire-resistant and stable support.
 Before installation, please check if the meter has been damaged during the
transportation(damage of meter cover, hanger, seal, and LCD display, etc)
 As the internal part of the electrical meter is composed by the delicate electronic components,
the meter should be carefully protected during the installation in order to avoid any damage.
Make sure that the power is cut off before the meter
installation, otherwise it will cause a threat to life. The fuse
should be disconnected and put it in a safe place to avoid the
accidental power-on.
C) Installation procedure
1、Select the proper position according to the meter dimensions, and indicate fixing points of the
meter on the installation panel.
2、Drill down holes on previously marked positions. (make sure that there’s no cable behind
before punching, avoid ruining the cable and threatening personal safety)