Installation Guide

Smart Plug-In Switch, Wi-Fi
before you start
Review this guide in its entirety. Consult an electrician with any questions or if
you are unsure of your abilities.
Caution: To reduce the risk of injury and/or overheating and damage to
other equipment:
• For dry, indoor use only.
• Connect the Smart Plug-In Switch to a 120 VAC, 60 Hz power
source ONLY.
• To reduce the risk of electrical shock, this equipment has a grounding
type plug that has a third (grounding) pin. If the plug does not fi t in
outlet, contact a qualifi ed electrician to install the proper outlet.
Visit www.legrand.us/radiant/smart-lighting/support for support.
installation & setup
1 | plug in the smart plug-in switch
Insert the lamp or device to be controlled into the outlet on the Smart
Plug-In Switch.
2 | test the smart plug-in switch
a
With the lamp or device on, press the button on the Legrand Smart Plug-In
Switch to turn your device on.
b
Press the button to turn your device off.
TROUBLESHOOTING TIP:
If the device is not responding to the switch, confi rm that the outlet is powered
and that the device is functional.
getting to know your plug-in
Item Name Description
1 Button
• Turns the device on or off.
• To return the switch to factory default, press
and hold the button for 30 seconds.
2 LED Locator Light
• Indicates the current state of the device.
Refer to “LED Locator Light Explanations”
for detail.
3 Outlet
• Plug your lamp or device into the socket.
1
2
3
LED LOCATOR LIGHT EXPLANATIONS
LED
Color
State of Light Explanation
Blinking
Amber
Factory default; ready to connect to your network.
Solid White Device is connected to your network.
specifi cations
Load Rating
Resistive 120 VAC, 60 Hz,15 A
Incandescent/halogen 1800 W
Ballast 15 A standard/electronic
LED 5 A
Motor ½ H P
Legrand reserves the right to change specifi cations without notice.
SCAN TO WATCH THE
INSTALLATION VIDEO
3 | set up your system
a
Download and launch the Smart Lights, Wi-Fi app by Legrand. The app is
available on the App Store or on Google Play.
b
Connect your Smart Plug-In Switch to your home network by following the
step by step instructions in the app.
c
Use the app to control your Smart Plug-In Switch.
Google Play and the Google Play logo are trademarks of Google LLC.
App Store is a service mark of Apple Inc., registered in the U.S. and other countries.
SCAN TO WATCH HOW
TO SET UP THE APP
SCAN TO DOWNLOAD
RESET TO FACTORY DEFAULT
You can delete the device
from the app to reset or while
device is off press and hold
power button for 10 seconds
then release.