Full Product Manual

ED1709R8 — Updated April 2019 — For latest specs visit www.legrand.us/wiremold
5
WIREMOLD
®
Meeting Room Solutions
InteGreat Cable Retractors
InteGreat Cable Retractors Ordering Information
InteGreat Cable Retractors attach easily to InteGreat A/V
Table Boxes, or can be mounted directly to the underside
of conference room tables. InteGreat Cable Retractors
have 5' (1.52m) of retractable cable that allows users to
have easy access to A/V and communication services.
With a simple pull, the cable locks into place or retracts
back into the table box, keeping the conference room
table neat and organized.
InteGreat Cable Retractors protect cables
while keeping them neat and organized.
Catalog No./Item Description/Specifications
TBCRCAT6 Cable Retractor with Category 6 cable – Mounts directly to the InteGreat Series
A/V Table Box or to the underside of the conference room table using the
TBCRHMK. Loaded with 12' (3.66m) of Cat6A cable that extends out 5' (1.52m)
from the retractor. Retractor has a female input from building infra structure, and a
male connector on the output side.
TBCRHDMI Cable Retractor with High Speed HDMI with Ethernet cable – Mounts directly
to the InteGreat Series A/V Table Box or to the underside of the conference room
table using the TBCRHMK. Loaded with 12' (3.66m) of HDMI with Ethernet cable
that extends out 5' (1.52m) from the retractor. Retractor has a female input from
building infrastructure, and a male connector on the output side. Input side has
mounting tab that allows installer to cable tie HDMI to the retractor to minimize
chances of a loose connection.
TBCRDP Cable Retractor with DisplayPort Cable – Mounts directly to the InteGreat Series
A/V Table Box or to the underside of the conference room table using the
TBCRHMK. Loaded with 12' (3.66m) of Displayport cable that extends out
5' (1.52m) from the retractor. Retractor has a female input from building
infrastructure, and a male connector with latch on the output side.
8 1/4"
(210mm)
8 1/4"
(210mm)
1 7/8"
(48mm)
8 1/4"
(210mm)
10"
(254mm)
1 7/8"
(48mm)
8 1/4"
(210mm)
10"
(254mm)
1 7/8"
(48mm)
NOTE: Per the HDMI specification, only four HDMI type cables exist: Standard Speed,
Standard Speed with Ethernet, High Speed and High Speed with Ethernet. The HDMI
organization has put in place a rule that requires all HDMI cables to be marketed in this
manner. Therefore you will not see our cables marketed as HDMI 2.0 cables. Keep in
mind that installing a cable supporting HDMI 2.0 features does not give your existing
devices with previous HDMI specifications the ability to experience 4K x 2K resolution,
3D audio return or Ethernet New A/V equipment supporting these desired features is
required in order to experience the newly specified features.
NOTE: Cable supports High Bit Rate (HBR) bandwidth and up to a 4K resolution. Built to
DisplayPort 1.2 standards, meeting the requirements of high performance applications.
Country of Origin: USA
Country of Origin: USA
Country of Origin: USA