Specification Sheet

GUIDE SPECIFICATIONS
Project Name Project No. Date
Project Location 16140-24 Wiring Devices
Specifier Note: Retain one or more colors and delete the others in brackets after Part No. and
from description.
Full Night Lights: radiant
®
Part No. NTLFULL[TCCC6][WCC6]; rated
120/125 volts AC; hidden sensor automatically controls night light; five adjustable
light settings, including OFF; back and side wire terminals accommodate #12
AWG and #14 AWG stranded and solid copper wire; push wire terminals
accommodate #14 AWG; tri-color: [light almond] [ivory] [black]; [white] only.
2.12 FAN SPEED CONTROLS
A. Fan Speed Controls:
1. General: Devices comply with UL1472 and conform to NEMA WD-1 and WD-6.
Devices are cULus listed and CSA certified.
Specifier Note: Retain one or more colors and delete the others in brackets after Part No. and
from description.
2. Fan Speed Controls: radiant
®
Part No. RHDH163P[TC][W]; rated 1.6 amps,
120 volts AC, 60Hz; polycarbonate enclosure; 3-speed fan control; preset, single
pole and 3-way operation; combines ON/OFF paddle switch with separate slider
for dimming control; white LED glows when device is OFF to make dimmer easy
to find in the dark; tri-color: [light almond] [ivory] [white]; [white] only.
Specifier Note: The following additional colors are available and sold separately. Retain one or
more colors and delete the others in brackets as required.
a. Face Colors: radiant
®
Part No. RHKIT[LA][I][W][BK][GRY][NI][DB]; [light
almond] [ivory] [white] [black] [gray] [nickel] [dark bronze] finish and color.
2.13 SCREWLESS WALL PLATES
A. General: Single and combination types matching corresponding wiring devices.
Specifier Note: Screwless wall plates are available in one (1) through six (6) gang sizes to com-
plement radiant
™
switches, sensors, and receptacles.
B. Wall Plates: Molded of .065" thick polycarbonate with .269" depth off the wall. Wall
plates are 3/8" wider and higher than standard wall plates for greater tolerance in
covering uneven openings in wall finish. Opening accommodates all NEMA 26 opening
devices. Each wall plate is equipped with a one-piece subplate that mounts over
devices; provide subplate with screws to align devices and ensure proper positioning of
wall plate. Plates are screwless and snap onto the subplate. Wall plates are UL listed
for compliance with UL 514D. Colors to match wiring devices.
Specifier Note: Retain as many of the following products as required for a specific project and
delete the others.
Specifier Note: In the six following paragraphs, retain finish and color as required for a specific
project and delete the others.
C. One-Gang Screwless Wall Plate: radiant
®
Part No.
RWP26[W][I][LA][BK][GRY][NICC6][DBCC6]; [Brown] [White] [Ivory] [Light Almond]
[Black] [Gray] [Nickel] [Dark Bronze] finish and color.
D. Two-Gang Screwless Wall Plate: radiant
®
Part No.
RWP262[W][I][LA][BK][GRY][NICC6][DBCC6]; [Brown] [White] [Ivory] [Light Almond]
[Black] [Gray] [Nickel] [Dark Bronze] finish and color.