Specification Sheet

GUIDE SPECIFICATIONS
Project Name Project No. Date
Project Location 16140-16 Wiring Devices
2. Duplex USB Charging Receptacles: radiant
®
Part No.
WRR26USBAC6[LA][I][W][BK][NI]CC6; rated 15 amps, 125 volts AC, NEMA
Configuration 5-15R; charges two devices simultaneously while still using
receptacles; compatible with USB 2.0 and 3.0 devices; 6.0 amps total charging
capacity; tamper-resistant receptacles with patented dual mechanical shutter
system with black "invisi-shutters" helps prevent insertion of foreign objects and
meets NEC requirements for tamper-resistance. UL listed for weather resistance;
back and side terminals accommodate #14 AWG - #10 AWG stranded and solid
copper wire; [light almond][ivory][white][black][nickel] finish and color; cULus and
UL Listed; CSA Compliant.
2.5 COMBINATION SWITCHES
Specifier Note: Retain as many of the following products as required for a specific project and
delete the others.
A. Two Single Pole Paddle Switches:
1. General: Switches comply with UL 20. Switches are cULus listed.
Specifier Note: Retain one or more colors and delete the others in brackets after Part No. and
from description.
Two Single Pole Paddle Switches: radiant
®
Part No. RCD11[LA][I][W][BK]; single-
pole; rated 15 amps, 120 volts; impact-resistant face and body; full wraparound
commercial grade metal straps with lock-in tabs; all screws are tri-drive; paddle
switches feature a simple up and down motion, permitting easy on-off control;
easy-to-use oversized main switch for primary load; back and side terminals
accept #14 - #10 AWG stranded and solid copper wire; [light
almond][ivory][white][black] color.
Specifier Note: Snap-in light module specified in the following subparagraph is sold separately.
Delete text below if not required on a specific project.
a. Snap-In Light Module: radiant
®
Part No. RCDLM locator light module
snaps-in for easy installation; rated 15 amps, 120/125 VAC; lights when
OFF; uses energy-efficient LED light; LED light will not generate heat and
will last, on average, 47 years.
B. Two Single Pole/3-Way Switches:
1. General: Switches comply with UL 20. Switches are cULus listed.
Specifier Note: Retain one or more colors and delete the others in brackets after Part No. and
from description.
Two Single Pole/3-Way Paddle Switches: radiant
®
Part No.
RCD33[LA][I][W][BK][NICC6][DBCC6]; single-pole, 3-way; rated 15 amps,
120 volts; impact-resistant face and body; full wraparound commercial grade
metal straps with lock-in tabs; all screws are tri-drive; paddle switches feature a
simple up and down motion, permitting easy on-off control; easy-to-use oversized
main switch for primary load; back and side terminals accept #14 - #10 AWG
stranded and solid copper wire; [light almond] [ivory] [white] [black] [nickel] [dark
bronze] finish and color.
Specifier Note: Snap-in light module specified in the following subparagraph is sold separately.
Delete text below if not required on a specific project.