Instruction Manual

Click on” “ to add the device.
Click on” “
Click confirmation button and
Next once reset is done.
+
+
+
Next
Next
i) Make sure that your smart device is connected to the internet and Bluetooth & Location are turned ON.
ii) Reset the device, hold the BT button on the remote control until the light blinks. If the light does not blink repeat the process.
iii) Select Add Device or “ ”
iv) Select Ventilation and select Add Manually.
+
ADD MANUALLY
vi) Congratulations!! Your HPM Smart fan is now paired with your
smart device. You can now control your fan from your App.
SECTION D: INSTRUCTIONS ON USING THE HPM CONNECT APP FOR SMART FAN
13
Add Device
Ventilation