INSTRUCTIONS ON USING THE HPM CONNECT APP
Contents SECTION A: GENERIC INSTRUCTIONS ON USING THE HPM CONNECT APP APP DOWNLOAD 1 REGISTRATION 1 SHARING SMART DEVICE 2 CREATE GROUP 4 ADD SMART DEVICES TO GROUP 5 SECTION B: INSTRUCTIONS ON USING THE HPM CONNECT APP FOR SMART DOWNLIGHT PAIRING THE DOWNLIGHT 6 AUTO SCAN 6 ADD MANUALLY 7 PAIRING MULTIPLE SMART DOWNLIGHTS 8 SET TIMER 8 RESET THE DOWNLIGHT 9 WALL SWITCH FOR DOWNLIGHT 9 SECTION C: INSTRUCTIONS ON PAIRING/UNPAIRING THE REMOTE CONTROL FOR DOWNLIGHT PAIRING THE REMOTE CO
SECTION A: GENERIC INSTRUCTIONS ON USING THE HPM CONNECT APP
Ensure your smart device is connected to the internet to follow all the steps. 1. HPM Connect App Download Download the HPM Connect App on your smart device. You can go to the store (App Store or Google Play) directly or scan the QR code given below, which will automatically take you to the download page. 2. Registration Open the HPM Connect App on your smart device. For new users, sign up for a new account and for an existing user, log-in with your username and password. a) Sign up using email.
3. Sharing Smart Device INDIVIDUAL SHARING Downlight Select the downlight/fan for sharing Click on Edit for downlight Click on Edit for fan John John.bell@legrand.com.
SHARE FROM HOME MANAGEMENT John Joe John.bell@legrand.com.au John Tom Tom John.bell@legrand.com.au Tom.pan@legrand.com.au Create a home Ralf Joe Joe.lau@legrand.com.au Pop Pop Pop.law@legrand.com.au Add Member Click on Me icon Select Home Management Select Create a home Scroll down and Select Add Member ■ Once the member is selected, the new member receives a notification from the HPM Connect App.
4.
5. Add Smart Devices to Group Downlight Select the downlight/fan for adding Click on Edit for downlight Click on Edit for fan Save Click on Edit Click on Location Select the group where you want to add the downlight and click Save.
SECTION B: INSTRUCTIONS ON USING THE HPM CONNECT APP FOR SMART DOWNLIGHT
1. Pairing the Downlight You may pair up to a max. number of 128 downlights on a single mesh. AUTO SCAN i) Make sure that your smart device is connected to the internet and Bluetooth & Location are turned ON. ii) Reset the device, first power ON the Downlight then switch OFF/ON 5 times (OFF period should be1-2 seconds). Then the downlight should start blinking (slowly like breathing 3 times). If the light does not blink and stays ON, repeat the process.
vii) Congratulations!! Your HPM Smart Downlight is now paired with your smart device. You can now control your downlight from your App. Downlight ADD MANUALLY i) Make sure that your smart device is connected to the internet and Bluetooth & Location are turned ON. ii) Click on Add Device or “ ” iii) Select Lighting iv) Select Add Manually + Lighting Add Device Next Click confirmation button and Next once reset is done.
v) Congratulations!! Your HPM Smart Downlight is now paired with your smart device. You can now control your downlight from your App. Downlight PAIRING MULTIPLE SMART DOWNLIGHTS ■ To pair another downlight repeat the steps for pairing.Once added, paired downlights can be controlled individually by + clicking power button. You can click on “ “ to add more downlights to this list. Done Click Done Click Done + By clicking each power button downlights can be controlled individually 2.
3. Reset the Downlight Lighting started blinking. Add Device Next Click on Resetting Device. Click on Resetting Devices How to reset downlight Step 1 Power ON the device and confirm the light is ON started blinking. Step 2 Switch light OFF and back ON (OFF periods 1- 2 seconds) Step 3 Next Next Confirm the light has started blinking. If the light does not blink and stays ON, repeat the process. Follow the steps for resetting device. Click confirmation button and Next once reset is done.
SECTION C: INSTRUCTIONS ON PAIRING/ UNPAIRING THE REMOTE CONTROL FOR DOWNLIGHT
1. Pairing the Remote Control i) Make sure that you have a working Remote Control. Ensure 2x AAA batteries are inserted. ii) Enable networking mode on Remote Control by pressing both ON & OFF buttons simultaneously for 5 seconds until the indicator on remote starts to flash. iii) Go to HPM Connect App and click on Add Device or “ ” iv) Select Lighting and select Auto Scan. v) Select Go to Add. + Indicator Lighting ON OFF Add Device vi) Click on Done once paired.
vii) Select the Remote control and add all downlights you want to control with Remote control. Save Click on Remote control Select Configure group A Select the downlights to add and click Save viii) Congratulations!! You can now control your HPM Smart Downlight with Remote control. Follow the same process if you want to add more devices for pairing. PAIRING WITHOUT APP (IF THE DOWNLIGHT & REMOTE CONTROL HAVE BEEN PAIRED BEFORE) 1.
SECTION D: INSTRUCTIONS ON USING THE HPM CONNECT APP FOR SMART FAN
1. Pairing the Smart Fan ■ Turn ON the wall switch for the fan. The light on the fan will be ON. ■ Have paired and working Remote control. If the remote is not paired with the fan, press and hold OFF button until the light on the fan blinks once within 10 seconds. ■ To pair the fan with your HPM Connect App, press and hold ‘BT’ button on the remote (up to 20 seconds) until the light on the fan blinks 3 times.
vi) Congratulations!! Your HPM Smart fan is now paired with your smart device. You can now control your fan from your App. ADD MANUALLY i) Make sure that your smart device is connected to the internet and Bluetooth & Location are turned ON. ii) Reset the device, hold the BT button on the remote control until the light blinks. If the light does not blink repeat the process. iii) Select Add Device or “+” iv) Select Ventilation and select Add Manually. Ventilation Add Device Click on”+“ to add the device.
v) Select Next once added and press Done. Done Done Next vi) Congratulations!! Your HPM Smart fan is now paired with your smart device. You can now control your fan from your App. PAIRING MULTIPLE SMART FANS ■ To pair another fan repeat the steps for pairing. Once added, paired fans can be controlled individually by cliking the power button. You can click on “+ “ to add more fans to this list.
2. Set Timer " Timer function is only for Fan and not for Light" Done Click on Edit Select the fan to set timer Click Timer function Set the timer and press Done (Select Cancel to cancel timer selection) ■ By sliding Switch All button all the paired fans can be turned ON/OFF at the same time. ■ After pairing, once fan is switched OFF and turned ON the fan with start at medium speed regardless of your previous settings. 3.
