Installation Guide

Smart LED Light Strip Kit White and Color with HomeKit Technology
I
nstallation Instructions
Keep your individual HomeKit Setup Code in a secure area. The code is
unique to your device.
Catalog Number(s): HKT1
Doc number 1507326 – Rev A
Item
Name
Description
1 Power Adaptor 24VDC, 1.5A supply – For indoor use only
2 Controller Connects to the strip and power adaptor.
3 6-Pin Connector Do not disconnect the strip from the controller.
4 Point of Extension If desired, strip extensions (HKT2) can be added here.
5
Designated Locations for
Cutting
The strip can be shortened by cutting along the pre-designated
locations indicated by scissors.
6 Reset Button
Reset the device by using a paper clip to press the reset button for 10
seconds until the light strip quickly flashes red 3 times. The device will
then restart.
Getting to Know Your Device
• This kit includes:
o 2m (6.5ft) self-adhesive light strip
o Controller
o Power adaptor (24V, 1.25A)
• The strip can be shortened by cutting at designated locations to a minimum length of 34cm (1.1ft).
• The strip can be extended up to 10m (32.8ft) by adding extensions (HKT2). Each extension is 2m (6.5ft).