User Manual

Page 77

(800)-321-2343 www.onqlegrand.com

Appendix C: Troubleshooting

T1. How do I restore my Access Point’s configuration to its factory default settings?

With the Access Point powered on, use a pin to press and hold the RESET button on the rear

panel for more than 8 seconds before releasing it.



Note: Once the Access Point is reset, the current configuration settings will be lost and

you will need to reconfigure the Access Point.

T2. What can I do if I forget my password?

1) Restore the Access Point’s configuration to its factory default settings. If you don’t know how

to do that, please refer to previous section T1;

2) Use the default user name and password: admin, admin;

3) Try to reconfigure your AP by following the instructions of this UG.

T3. What can I do if I cannot access the web-based configuration page?

Assign a static IP address 192.168.40.100 for your computer first before logging onto the

management page. Here are the procedures in Windows 7, for example.

1) Go to Start > Settings > Control Panel, and then Click View network status and tasks.