User Manual

Page 73

(800)-321-2343 www.onqlegrand.com

Appendix A: Application Example

The DA2155-V1 allows you to connect a wireless PC to a wired network. If you want to connect your

computer, equipped with wireless adapter, to a wired network wirelessly, you can perform the following

instructions.

1. Configure the AP via a wired connection.

1) Connect your AP to your PC with an Ethernet cable.

2) Configure the IP address for your PC to communicate with the AP referring to 3.1 Configure

the PC.

3) Log on to the web-based management page. Configure your AP in the Access Point mode

and check the Enable SSID Broadcast box referring to 4.7.1 Wireless Settings.

4) View the Wireless > Wireless Settings page and keep the SSID of the AP in mind. (Here

we choose Legrand_123456 as the SSID for example.) You are suggested to change the

SSID and secure your wireless network referring to 4.7.1 Wireless Settings and 4.7.2

Wireless Security.

5) Remove the Ethernet cable between the AP and your PC.

2. Connect your AP to the LAN port on the Router with an Ethernet cable.

3. Configure your PC to connect to the network wirelessly.

1) Click start (in the lower left corner of the PC’s screen), right-click My Network Connections

and choose Properties.

DA2155-V1