User Manual

Page 67

(800)-321-2343 www.onqlegrand.com

2. Enter the path name where you want to store the file or click Browse… to select the location.

3. Click Upgrade.



Note: Do not turn off the device or press the Reset button while the firmware is being

upgraded. The device will reboot after the Upgrading has been finished.

4.9.6 Factory Defaults

Selecting System Tools > Factory Default allows you to restore the factory default settings for the

device as shown in Figure 4-37.

Figure 4-37 Restore Factory Defaults

Click Restore to reset all configuration settings to their default values.

 Default User Name: admin

 Default Password: admin

 Default IP Address: 192.168.40.252

 Default Subnet Mask: 255.255.255.0



Note: Any settings you have saved will be lost when the default settings are restored.

4.9.7 Backup & Restore

Selecting System Tools > Backup & Restore allows you to save all configuration settings to your

local computer as a file or restore the device's configuration as shown in Figure 4-38.

Figure 4-38 Save or Restore the Configuration