User Manual

Page 4

(800)-321-2343 www.onqlegrand.com

2.0 Hardware Installation

2.1 Before You Begin

Please read this User Guide carefully before installing and using the equipment. The operating

distance range of your wireless connection can vary significantly depending on the physical position of

the wireless devices. Factors that can weaken signals by getting in the way of your network’s radio

waves are metal appliances or obstructions, and walls. Typical ranges vary base on the types of

materials and background RF (radio frequency) noise in your home or office.

For best performance of your wireless network, you are suggested to:

1). Avoid redundant obstacles and interference between the wireless devices.

2). Keep your AP away from appliances with a strong electric field or magnetic field, such as a

microwave oven or refrigerator.

3). Place the AP near the center of the area in which your computers operates

2.2 Basic Requirements

 Use only the power adapter provided with your AP

 The electrical outlet should be installed near the device and should be easily accessible

 Place your AP in a well ventilated place, far from direct sunlight, any heater, or heating vent

 Leave at least 2 inches (5cm) space around the device for heat dissipation

 Turn off your AP and unplug the power adapter in a lighting storm to avoid damage

 Use web browsers such as Microsoft Internet Explorer 5.0 or above

 Operating temperature: 0℃~40℃ (32℉~104℉)

 Operating Humidity: 10%~90%RH, Non-condensing