User Manual

Page 52

(800)-321-2343 www.onqlegrand.com

2. Modify the information.

3. Click the Save button.

Click the Enable All button to make all entries enabled

Click the Disabled All button to make all entries disabled.

Click the Delete All button to delete all entries

Click the Next button to go to the next page and click the Previous button to return to the previous

page.

For example: If you desire that the wireless station A with MAC address 00-0A-EB-00-07-BE should be

able to access the device, while all other wireless stations cannot access the device, you should

configure the Wireless MAC Address Filtering list by following these steps:

1. On the screen shown in Figure 4-20, click the Enable button to enable this function.

2. Select the radio button: Allow the stations specified by any enabled entries in the list to

access under “Filtering Rules”.

3. Delete all or disable all entries if there are any entries already.

4. Click the Add New... button and enter the MAC address 00-0A-EB-00-07-BE in the MAC Address

field, enter Wireless Station A in the Description field and select Enabled in the Status pull-down

list. Click the Save button.

The filtering rules that configured should be similar to the following list:



Note:

If you enable the function and select the “Allow the stations specified by any enabled

entries in the list to access” under Filtering Rules, and there are not any enabled entries in

the list, no wireless stations will be able to access the device.