User Manual

Page 51

(800)-321-2343 www.onqlegrand.com

The Wireless MAC Address Filtering feature allows you to control wireless stations accessing the

device, depending on the station's MAC address.

 Wireless MAC Filtering - Click the Enable button to enable the Wireless MAC Address Filtering.

The default setting is disabled.

To Add a Wireless MAC Address filtering entry, click the Add New… button. The “Add or Modify

Wireless MAC Address Filtering entry" page will appear, as shown in Figure 4-21

Figure 4-21 Add or Modify Wireless MAC Address Filtering entry

 MAC Address - Enter the wireless station's MAC address.

 Description - Give a simple description of the wireless station.

 Status - Select a status for this entry, either Enabled or Disabled.

To set up an entry, follow these instructions:

First, you must decide whether a wireless station can access the device or not. If you desire that the

unspecified wireless station can access the device, “Enabled” will be selected under Status:,

otherwise, Disabled will be selected.

To add a MAC Address Filtering entry, follow these instructions:

1. Enter the appropriate MAC Address into the MAC Address field. The format of the MAC Address

is XX-XX-XX-XX-XX-XX (X is any hexadecimal digit). For example: 00-0A-EB-B0-00-0B.

2. Enter a simple description of the wireless station in the Description field. For example: Wireless

station A.

3. Select Enabled or Disabled for this entry on the Status pull-down list.

4. Click the Save button to save this entry.

To add additional entries, repeat steps 1-4.

To modify or delete an existing entry:

1. Click the word Modify in the entry you want to modify it, or Delete if you want to delete the entry.