User Manual

Page 50

(800)-321-2343 www.onqlegrand.com

 WEP Key Format - You can select ASCII or Hexadecimal format. ASCII format stands for

any combination of keyboard characters in the specified length. Hexadecimal format stands

for any combination of hexadecimal digits (0-9, a-f, A-F) in the specified length.

 WEP Key - Select which of the four keys will be used and enter the matching WEP key

information for your network in the selected key radio button. These values must be identical

on all wireless stations in your network.

 Key Type - You can select the WEP key length (64-bit, or 128-bit, or 152-bit.) for encryption.

"Disabled" means this WEP key entry is invalid.

4) For 64-bit encryption - You can enter 10 hexadecimal digits (any combination of 0-9, a-f, A-

F, zero key is not permitted) or 5 ASCII characters.

5) For 128-bit encryption - You can enter 26 hexadecimal digits (any combination of 0-9, a-f, A-

F, zero key is not permitted) or 13 ASCII characters.

6) For 152-bit encryption - You can enter 32 hexadecimal digits (any combination of 0-9, a-f, A-

F, zero key is not permitted) or 16 ASCII characters.



Note:

1. If you do not set the key, the wireless security function is still disabled even if you have

selected Shared Key as Authentication Type.

2. You will be reminded to reboot the device after clicking the Save button.

4.7.3 Wireless MAC Filtering

Selecting Wireless > Wireless MAC Filtering will allow you to set up some filtering rules to control

wireless stations accessing the device. The filtering depends on the station’s own MAC address as

shown in Figure 4-20. This function is not available when the operation is set to Client. Since this

configuration is the same for each operational mode, the Access Point mode is used for the example.

Figure 4-20 Wireless MAC address Filtering