User Manual

Page 2
301 Fulling Mill Road, Suite G ©Copyright 2012 by Legrand,
Middletown, PA 17057 Inc All Rights Reserved.
(800)-321-2343 www.onqlegrand.com
The front panel of the DA2155-V1 consists of several LED indicators (described below) and one WPS
button (operation covered later).
LED Explanation
Name
Status
Indication
PWR
Off
No Power
On
Power on
SYS
Off
The device has a system error
On
The device is initialising
Flashing
The device is working properly
LAN
Off
There is no device linked to the corresponding port
On
There is a device linked to the corresponding port but no activity
Flashing
There is an active device linked to the corresponding port
WLAN
Off
The Wireless function is disabled
Flashing
The Wireless function is enabled
WPS
Slow Flash
A wireless device is connecting to the network by WPS function. This
process will last in the first 2 minutes.
On
A wireless device has been successfully added to the network by
WPS function.
Quick Flash
A wireless device failed to be added to the network by WPS function.
Table 1-1
1.4 The Rear Panel
Figure 1-2
Viewed from left to right, the following parts are located on the rear panel of DA2155-V1.
POWER: The power port connects to the power adapter provided with the DA2155-V1.