User Manual

Page 46

(800)-321-2343 www.onqlegrand.com

 WPA/WPA2-Personal(Recommended) - Check this radio button to enable personal security.

 Version - You can select one of following versions.

1) Automatic(Recommended)

2) WPA-Personal - Wi-Fi Protected Access.

3) WPA2-Personal - WPA version 2.

 Encryption - You can select either Automatic, TKIP or AES.

 Password - Enter 8-63 ASCII or 8-64 Hexadecimal characters.

 Group Key Update Period - Specify the group key update interval in seconds. The value can

be either 0 or at least 30. Enter 0 to disable the update.

 WEP - Select 802.11 WEP security.

 Type - You can select one of following types.

1) Automatic

2) Shared Key - Select 802.11 Shared Key authentication type.

3) Open System - Select 802.11 Open System authentication.

 WEP Key Format - You can select ASCII or Hexadecimal format. ASCII format stands for

any combination of keyboard characters in the specified length. Hexadecimal format stands

for any combination of hexadecimal digits (0-9, a-f, A-F) in the specified length.

 WEP Key - Select which of the four keys will be used and enter the matching WEP key

information for your network in the selected key radio button. These values must be identical

on all wireless stations in your network.

 Key Type - You can select the WEP key length (64-bit, or 128-bit, or 152-bit.) for encryption.

"Disabled" means this WEP key entry is invalid.

1) For 64-bit encryption - You can enter 10 hexadecimal digits (any combination of 0-9, a-f, A-

F, zero key is not permitted) or 5 ASCII characters.

2) For 128-bit encryption - You can enter 26 hexadecimal digits (any combination of 0-9, a-f, A-

F, zero key is not permitted) or 13 ASCII characters.

3) For 152-bit encryption - You can enter 32 hexadecimal digits (any combination of 0-9, a-f, A-

F, zero key is not permitted) or 16 ASCII characters.



Note:

1. If you do not set the key, the wireless security function is still disabled even if you

have selected Shared Key as Authentication Type.

2. You will be reminded to reboot the device after clicking the Save button.