User Manual

Page 28
301 Fulling Mill Road, Suite G ©Copyright 2012 by Legrand,
Middletown, PA 17057 Inc All Rights Reserved.
(800)-321-2343 www.onqlegrand.com
Method Two: Enter the PIN from my AP
Step 1: Get the Current PIN code of the AP in Figure 4-5 (each AP has its unique PIN code. In this
example the PIN code is 13492564).
Step 2: For the configuration of the wireless adapter, choose “Enter the PIN of my access point or
wireless router” in the configuration utility of the WPS as below, and enter the PIN code of
the AP into the field after “PIN”. Then click Connect.
The WPS Configuration Screen of Wireless Adapter

Note:
The default PIN code of the AP can be found on its label or the WPS configuration
screen as in Figure 4-5 .
You will see the following screen when the wireless adapter has successfully connected to the AP.