User Manual

Page 23

(800)-321-2343 www.onqlegrand.com

 Add Device - You can add a new device to the existing network manually by clicking this button.

To add a new device:

If the wireless adapter supports Wi-Fi Protected Setup (WPS), you can establish a wireless connection

between wireless adapter and device using either Push Button Configuration (PBC) method or PIN

method.



Note:

To build a successful connection by WPS, you need to do the corresponding

configuration of the new device for WPS functionality.

Below is an example of configuration of a Wireless Adapter.

I. By PBC

If the wireless adapter supports Wi-Fi Protected Setup and the Push Button Configuration (PBC)

method, you can add it to the network by PBC with the following two methods.

Method One:

Step 1: Press the WPS button on the front panel of the device.

Step 2: Press and hold the WPS button of the adapter directly for 2 or 3 seconds.

Step 3: Wait for a while until the next screen appears. Click OK to complete the WPS configuration.

DA2155-V1