User Manual

Page 14
301 Fulling Mill Road, Suite G ©Copyright 2012 by Legrand,
Middletown, PA 17057 Inc All Rights Reserved.
(800)-321-2343 www.onqlegrand.com
3) Find the SSID of the Access Point / Router or WISP, and click Connect in the corresponding
row. You will then return to the previous page.
4) Select the security mode and enter the password that is the same as on your router or
access point in Figure 3-13.
5) Click Next, you will then come to Network Settings page for further configuration.
D. If you chose Bridge with AP operation mode, the Wireless Settings page will be shown as in
Figure 3-15.
Figure 3-15 Wireless Settings – Bridge with AP mode
1) Click Survey, then the window displaying a list of available SSIDs will appear as in Figure
3-14.
2) Find the SSID of the Access Point / Router or WISP, and click Connect in the corresponding
row. You will then return to the page shown in Figure 3-15.
3) Select the security mode and enter the password that is the same as on your router or
access point.
4) Click Next in Figure 3-15, then the page below (Figure 3-16) will appear. You can name the
bridge AP in Local Wireless Name. With Use the same security settings for the local
wireless network as the root AP selected, the security settings of the wireless network will
be the same with the root AP.