User Manual

Page 8
301 Fulling Mill Road, Suite G ©Copyright 2012 by Legrand,
Middletown, PA 17057 Inc All Rights Reserved.
(800)-321-2343 www.onqlegrand.com
4. Configure the IP address manually.
1) Select Use the following IP address.
2) Enter 192.168.40.* (* is any integer between 1 to 250) into the IP address field,
255.255.255.0 into the Subnet mask filed.
3) Click OK to keep your settings.
Figure 3-4
5. Verify the network connection between your PC and the AP via the Ping command. The following
example is in Windows XP Operating System.
1) Click Start > Run tab. Enter cmd in the filed and click OK.
2) Type ping 192.168 .40.252 on the screen that displays and then press Enter.
If the result displayed is similar to that shown in Figure 3-5 below, the connection between
your PC and the AP has been successfully established.
Figure 3-5
192 . 168 . 40 . 10
Pinging 192.168.40.252 with 32 bytes of data:
Reply from 192.168.40.252: bytes=32 time<1ms TTL=64
Reply from 192.168.40.252: bytes=32 time<1ms TTL=64
Reply from 192.168.40.252: bytes=32 time<1ms TTL=64
Reply from 192.168.40.252: bytes=32 time<1ms TTL=64
Ping statistics for 192.168.40.252:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms