User's Manual

Owner’s Manual of DA1104
-81-
Figure 4-78 SNMP
The page includes the following fields:
Object Description
Enable SNMP To enable the SNMP feature.
Name The name of the AP for SNMP management.
Location The location of the AP for SNMP management.
Contact The contact person for the AP in case for SNMP management purpose.
Read/Write Community The community name for SNMP management.
Read-Only Community The community name for SNMP management.
Trap Receiver IP Address The IP address of SNMP Trap Server.
4.5.4 NTP Settings
This section assists you in setting the Wireless AP’s system time. You can either set the time and date manually
or automatically obtain the time from the Internet.
Choose menu “Management
 NTP Settings” to configure the system time. You can also maintain the system
time by synchronizing with a public time server over the Internet. After the configuration, please click the “OK”
button to save the settings.
The configured time and date settings are lost when the Wireless AP is powered off.