User's Manual

Owner’s Manual of DA1104
-65-
Enable Universal
Repeater Mode
(Acting as AP and client
simultaneously)
Universal Repeater is a technology used to extend wireless coverage.
To enable Universal Repeater Mode, check the box and enter the SSID
you want to broadcast in the field below. Then please click “Security”
submenu for the related settings of the AP you want to connect with.
4.4.2 Advanced Settings
Choose menu “WLAN2 (2.4GHz)
 Advanced Settings” to configure the 2.4GHz advanced settings for the
wireless network on this page. After the configuration, please click the “Apply” button to save the settings.
Figure 4-60 Wireless Advanced Settings – 2.4GHz
The page includes the following fields:
Object Description
Fragment Threshold You can specify the maximum size of packet during the fragmentation
of data to be transmitted. If you set this value too low, it will result in bad
performance.
Default is “2346”.
RTS Threshold When the packet size is smaller than the RTS threshold, the access
point will not use the RTS/CTS mechanism to send this packet.
Default is “2347”.