User's Manual

Owner’s Manual of DA1104
-59-
Default is “Auto”.
Enable Mac Clone
(Single Ethernet Client)
Enable Mac Clone.
 Example of how to configure Client Mode. Please take the following steps:
To configure each wireless parameter, please go to the “WLAN2 (2.4GHz) → Basic Settings” page.
Step 1. Go to “WLAN2 (2.4GHz) → Site Survey” page and click “Site Survey” button.
Step 2. Choose the root AP from the list. If the root AP is not listed in the table, re-click “Site Survey” to update
the list.
Figure 4-55 Client – AP List
Step 3. Enter the Security Key of the root AP and then click “Connect”.