User's Manual

Owner’s Manual of DA1104
-54-
 Universal Repeater
This mode allows the AP with its own BSS to relay data to a root AP to which it is associated with WDS
disabled. The wireless repeater relays the signal between its stations and the root AP for greater wireless
range.
Here is the example of how to configure Universal Repeater Mode.Use the following steps:
To configure each wireless parameter, go to the “WLAN2 (2.4GHz) → Basic Settings” page.
Step 1. Configure wireless mode to “AP” and then check “Enable Universal Repeater Mode (Acting as AP and
client simultaneously)”. Click “Apply Changes” to take effect.
Figure 4-49 2.4GHz Universal Repeater-1
Step 2. Go to 2.4GHz Site Survey page to find the root AP. Select the root AP that you want to repeat the signal,
註解 [MSR3]: simulaneousl
y at the botttom is spelled
wrong