User's Manual

Owner’s Manual of DA1104
-47-
If the wireless adapter supports Wi-Fi Protected Setup (WPS), you can establish a wireless connection between
wireless adapter and AP using either software Push Button Configuration (PBC) method or PIN method.
To build a successful connection by WPS, you should also do the corresponding configuration of
the new device for WPS function.
A. By Software Push Button Configuration (PBC)
i. Click the “Start PBC” Button on the WPS page of the AP.
Figure 4-39 WPS-PBC – 5GHz-1
Figure 4-40 WPS-PBC – 5GHz-2
ii. The process must be finished within 2 minutes.
iii. Wait for a while until the next screen appears. Click OK to complete the WPS configuration.
B. By PIN
If the new device supports Wi-Fi Protected Setup and the PIN method, you can add it to the network by PIN with
the following two methods.
Method One: Enter the PIN of your Wireless adapter into the configuration utility of the AP