User's Manual

Owner’s Manual of DA1104
-38-
Default is “Auto”.
Associated Clients
Click the “Show Active Clients” button to show the status table of active
wireless clients.
Enable Universal
Repeater Mode
(Acting as AP and client
simultaneously)
Universal Repeater is a technology used to extend wireless coverage.
To enable Universal Repeater mode, check the box and enter the SSID
you want to broadcast in the field below. Then please click “Security”
submenu for the related settings of the AP you want to connect with.
4.3.2 Advanced Settings
Choose menu “WLAN1 (5GHz)
 Advanced Settings” and you can configure the 5GHz advanced settings for
the wireless network on this page. After the configuration, please click the “Apply” button to save the settings.
Figure 4-30 Wireless Advanced Settings – 5GHz
The page includes the following fields:
Object Description
Fragment Threshold You can specify the maximum size of packet during the fragmentation
of data to be transmitted. If you set this value too low, it will result in bad
performance.
Default is “2346”.
RTS Threshold When the packet size is smaller than the RTS threshold, the access
point will not use the RTS/CTS mechanism to send this packet.