Specification Sheet

UNDER-CABINET LIGHTING SYSTEMUNDER-CABINET LIGHTING SYSTEM
12” Modular Track Includes one Outlet Module and one Blank Module. Can support up
to two LED lights.
Provides 120V power via 15A outlet modules and 20A pass-through.
Module openings are 6” on-center.
APMT12TM2
18” Modular Track
Includes one Outlet Module and one Blank Module. Can support up to
two LED lights.
Provides 120V power via 15A outlet modules and 20A pass-through.
Module openings are 9” on-center.
APMT18TM4
27” Modular Track
Includes two Outlet Modules and one Blank Module. Can support up to
three LED lights.
Provides 120V power via 15A outlet modules and 20A pass-through.
Module openings are 9” on-center.
APMT27TM2
18” Modular Track Extender
Enables a perfect fit for any kitchen. Simply cut to length (minimum of
6”) and attach to end of Modular Track.
Does not include any module openings.
APME18TM2
Modular Track Corner Connector
Use with installations that include a right-angle corner to connect two
Modular Tracks.
Allow 3” on each side for installations with Corner Connectors.
APCCTM4
Control Box
with Paddle Dimmer
450W Connectstoexistingin-wallwiring.FitsontoendofModularTrack,adding5”onto
system length.
Includesadorne450WCFL/LEDPaddleDimmer(ADPD453LM2).
GFCIprotectionmustbeprovidedattheelectricalpanel
APCB1TM4
Control Box with Paddle
Dimmerand15AGFCI
450W
15A
Connectstoexistingin-wallwiring.FitsontoendofModularTrack,adding5.25”onto
system length.
Includesadorne450WCFL/LEDPaddleDimmer(ADPD453LM2) and 15A Tamper-Resistant
GFCIOutlet(AGFTR153M4).
APCB2TM2
Plug-In Control Box
Snaps into any module opening on the track and plugs into an existing outlet to provide
system power. Cord length of 11” can easily be shortened to match the distance from outlet
to Modular Track.
APCB3TM4
Control Box, No Devices,
1-Gang
Connectstoexistingin-wallwiring.FitsontoendofModularTrack,adding5”onto
system length. Customize with your preference of adorne dimmers, switches, or outlets.
APCB4TM1
Control Box, No Devices,
2-Gang
Connectstoexistingin-wallwiring.FitsontoendofModularTrack,adding5.25”onto
system length. Customize with your preference of adorne dimmers, switches, or outlets.
APCB5TM1
Direct Wire Connector
Enables direct wire feed of power from in-wall wiring, eliminating need for a Control Box.
Connector is 6” in length.
APDWCTM1
Modular Tracks
The adorne system is a flexible and modular solution designed to eliminate kitchen clutter.
Fullycustomizable,youcanselectfromseveraltypesofmodulesandmodifyyoursystem
in minutes. Simply pop out an existing module and replace it with a new module at any time.
The Modular Tracks listed below simply plug together to create a full system custom-
designed for any kitchen. They form the base of the system, housing all of the wiring
that connects the modules.
Each system must include a Control Box or Direct Wire Connector that is hardwired to
existing wiring or plugged into an outlet on the backsplash.
See page 55 for more information.
Control Boxes
Every Under-Cabinet Lighting System must include one of the below Control Boxes or Direct
Wire Connector. These boxes connect to existing in-wall wiring or plug into an outlet on the
backsplash to provide system power.
Control Boxes include system end caps, ensuring a clean finish on the left and right edges
of the installed system.
NAME COMPLIANCE SPECIFICATIONS PART NUMBER NAME COMPLIANCE SPECIFICATIONS PART NUMBER
5857