Product Brochure

WWW.LEGRAN D.US/DESIGNER WWW.LEGRAND.US/DESIGNER
40 41
Spacers
NAME PART NUMBER
1-Gang Mounting Frame
2-Gang Mounting Frame
3-Gang Mounting Frame
4-Gang Mounting Frame
5-Gang Mounting Frame
6-Gang Mounting Frame
AF1G
AF2G
AF3G
AF4G
AF5G
AF6G
The adorne Frame System
The frame is the foundation upon which the adorne modular system is
built. It is manufactured with high-strength galvanized metal and includes
a ground wire.
Frames include plastic spacers. The spacers remain in place for devices
with full size back bodies. They must be removed for devices with plus size
back bodies, such as dimmers and GFCI outlets.
The frame completes the enclosure, providing a safe installation during the
construction phase and allowing the wall plate to be installed at the end of
the project.
Each frame includes a leaded ground that supports the full adorne
system. Most switches, outlets and wall plates (including cast metals) are
automatically grounded to the frame, saving time and ensuring a safe and
reliable ground path.
1-Gang, Full Size
with Spacers
2-Gang with Spacers1-Gang, Plus Size
without Spacers
3-Gang with Spacers
The adorne Modular System
Complete versatility and unmatched flexibility
4-Gang with Spacers
adorne fits in all existing NEMA-ap-
proved wallboxes.*
* Does not apply to Pop-Out Outlet.
** Does not apply to Pop-Out Outlet,
20A Outlet, or 20A GFCI Outlet.
The frame is grounded. Device snaps into the frame and
is automatically grounded**.
It self-aligns without any screws.
Wall plate snaps onto
frame; no screws required.
Modular system solves
device alignment problems,
improving fit and finish in
multi-gang installations.
Standard
Wallbox
Frame
Device
Wall Plate
Ground Wire
6-Gang with Spacers
5-Gang with Spacers
Mounting Frames
Devices simply snap into the
frame from the front. During
installation, screw the frame
to the box, then pull the wires
through the frame and wire
the device. Then, simply snap
the device into the frame.
adorne Dimmers & Switches
WALL PLATES